What To Do If There Is No Hot Water

Set An Appointment

Just how do you really feel on the subject of No Hot Water — Water Heater Repair?

Numerous contemporary residences take advantage of an electric water heater for their heating unit, because of its ease and also ease of use. However, much like any other electrical home appliances, issues might emerge with its use, unexpectedly. It can be really aggravating to get up to a cold shower instead of a hot one or having your bath with water that isn't hot enough or even as well hot. Whatever the case may be, hot water heater troubles can be fairly aggravating. The good news is, we have actually made a checklist of feasible solutions to your water heater issues. There are a number of factors that could cause many of these problems, it could be a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for security. Whatever the issue is, getting it taken care of must not position excessive of an issue if you comply with these actions:

Call A Specialist:

If after changing all malfunctioning components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to call a professional plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the amount of warm water required in your house. Whatever the instance might be, an expert plumber would help solve the problem.

Examine Your Power Supply:

As standard as this might appear, it is extremely required. Without sufficient power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power trouble. Inspect if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the issue, merely turn it off and on once more. Replace any busted or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently working.

Check Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature settings on your top thermostat. Guarantee the breaker is switched off prior to doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This should assist heat the water. Transform the circuit breaker back on and examine if the issue has actually been fixed.

Check the Burner in the Water Heater:

If it's not a power issue, then attempt checking out your burner if it is still working. Check each of your heating elements to ensure the problem isn't with any one of them. If any of them is malfunctioning, replace that component and then inspect whether the warm water is back on.

Final thought

Hot water heater problems are not constantly major. Much of them result from minor problems like a blown fuse or damaged heating element. Replacing the malfunctioning components should work. Nonetheless, if you are still unable to resolve the issue, give a call to your local plumber ahead to get it repaired.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

Hopefully you enjoyed reading our section about Hot Water Heater Repair. Many thanks for taking a few minutes to browse our posting. Do you know about another person who is inquisitive about the subject? Why not share it. We thank you for reading our article about Hot Water Heater Repair.

Book-Now